Intex Avatar2 Tab Firmware & flash tool
Firmware upgrade procedure:
Firmware upgrade procedure:
- Connect charger with Tab & Tab with PC via USB cable.
- Open Sherif roms installer.exe, application window
- Select “FW Path” to update.img file.
- Hold “volume up” (key) on tablet and Reset it via pin hole.
- Windows will prompt you to install the device. Provide driver location path to USB driver > x86 / amd64 >Vista/Win7/Xp depending on OS of your PC.
- After driver installation is finished, it will be shown as RK29 device inside My Computer > Manage > Devices.
- Check 1st icon under Connected Devices, if it turns Green the device is ready to upgrade and driver has been installed properly, otherwise install USB driver again.
- Keep holding Menu key till you see Green icon under connected devices. Then release the M key.
- Click on “Upgrade” icon on bottom left side. Device upgrade will start, Green icon will turn to blinking Yellow.
- Wait for the download process to finish "Success<1> Fail<0>".
- Click "Exit" and disconnect USB cable.
- Tab will Auto calibrate, press "OK"It will display Launcher after few minutes.
tnx its working :D
ReplyDelete